View source for Howto make FreeBSD 5.x work on a Biostar M7VIZ

[[Category:Unix]]
.. or any combination of mobo with KM400 / 8237 southbridge / via rhine (vr0) nic, put this in '''/boot/device.hints''':

 hint.apic.0.disabled="1"


To get the installer working, choose option #6 at boot time, and type '''set hint.apic.0.disabled="1"''' and then '''boot'''. Not doing this (in my case at least) something gets messed up and causes an interrupt storm, and the system locks within seconds of being fully booted, if you're lucky to get that far.

See: 

* http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html#AEN17439